Previous slide
Next slide

All Hydro Coco base feed sizes

Previous slide
Next slide

Hydro/Coco RO/Soft Water

A+B Hydro/Coco RO/Soft Water base feeds are explicitly designed for reverse osmosis water or soft water and hydro/coco combination.

We provide an additional boost of calcium and magnesium into this formula to help support soft water and reverse osmosis systems. Our 2 part system is highly concentrated to save you money while also providing all the necessary nutrients to your plants. These products have all of the essential macro and micro growth nutrients needed for excellent plant growth and bloom phases. Our formula is based on Liebig’s Law of the minimum, providing your plants with the 17 essential nutrients. It is critical that plants not only get sufficient nutrients but also in the appropriate ratio. The high-quality, food-grade nutrients will be absorbed entirely and leave little to no residue behind, leaving your plants clean and strong. 

Grow NPK: 5 – 0 – 6 TOTAL 

Bloom NPK: 5 – 1 – 7 TOTAL

*Our RO/Soft water formulas are designed for soft water areas (reverse osmosis water or tap water with a PPM below 150).

*No PGRs are used in any of our products

Read More

Soil Hard Water Base Feed

Quick Information

Grow Base Feeds

Dosage

NPK

Sizes

EC

Quick Information

Bloom Base Feeds

Dosage

NPK

Sizes

EC

Grow Phase: Laying the Foundation

During the Grow Phase, a plant is at its most vulnerable. Fungi and bacteria related diseases are a threat to the underdeveloped roots and leaves. The right mix of the 17 essential elements is needed to help a plant develop during the Grow phase and support a maximum growth rate. The proper mix will make and keep the plant vital and strong throughout this phase.

A+B Grow Hydro/Coco RO/Soft Water is a precisely mixed 2 part system that stimulates maximum growth and prepares your plants to reach their maximum yield.

*A+B Grow Hydro/Coco RO/Soft Water is optimized to reach PPM 900-1,000 or EC levels: 1.8-2.0 (it is possible to deviate) to get an even better result!

Play Video
Bloom Phase: Time to Shine

During the Bloom Phase, a plant is getting ready to pollinate. The photoreceptor proteins within the plant indicate when to bloom. At that moment, the plant starts creating blossoms, or flowers, so that pollen can fertilize the female plant. This process costs the plants energy. The right balance of the 17 essential elements is needed to stimulate the plants’ bud formations during the Bloom phase. Phosphorus is a key element that is needed for maximum yields. The proper ratio of nutrients will enhance the Bloom phase to create bigger buds and boost yield.

A+B Bloom Hydro/Coco RO/Soft Water is a perfectly mixed 2 part system that stimulates maximum blooms and prepares your plants to reach their maximum yield.

*A+B Bloom Hydro/Coco RO/Soft Water is optimized to achieve PPM 1,100-1,200  or EC levels: 2.2-2.4 (it is possible to deviate) to get an even better result!

Play Video
Previous slide
Next slide

Hydro/Coco - RO/Soft Water

Hydro/Coco Base Feeds Designed for Soft Water

A+B Hydro/Coco RO/Soft Water base feeds are explicitly designed for reverse osmosis water or soft water and hydro/coco combination. We provide an additional boost of calcium and magnesium into this formula to help support soft water and reverse osmosis systems. Our 2 part system is highly concentrated to save you money while also providing all the necessary nutrients to your plants.

A+B Grow and Bloom Soil base feeds are explicitly designed for soil. Our 2 part systems are highly concentrated to save you money while also providing all the necessary nutrients to your plants. These products have all of the essential macro and micro growth nutrients needed for excellent plant growth and bloom phases. Our formula is based on Liebig’s Law of the minimum, providing your plants with the 17 essential nutrients. It is critical that plants not only get sufficient nutrients but also in the appropriate ratio. The high-quality, food-grade nutrients will be absorbed entirely and leave little to no residue behind, leaving your plants clean and strong.

Grow NPK: 5 – 1 – 6 TOTAL
Bloom NPK: 5 – 2 – 7 TOTAL

*No PGRs are used in any of our products

A+B (EACH)

Min 8.5ML – Max 12.5ML
PPM 900 – 100

Previous slide
Next slide

FAQ - Hydro/Coco - RO/Soft Water

A & B together contain the basic elements a plant needs to grow strong and healthy. They come in separate products to make the products as concentrated as possible to prevent reactions within the products. They are both essential to plant growth.

Both A & B contains several elements that can not be put together, because of chemical reactions that would occur. Are these elements really needed for a plant to grow strong and healthy? Yes. These elements can also be found in nature, but not as concentrated as in our A & B. That’s why you should always add the A-concentrate to the water first, then stir it well, finally followed by the B part in the same process. This to prevent chemical reactions.

Yes. Soil is a substrate, which always contains some form of nutrition and the nutrients need to be adjusted to make sure that you do not get an overflow of nutrition, which would harm your plants. On the other hand, Hydro/Coco is a substrate, which does not contain nutrition and therefore the nutrients need to be adjusted to make sure that no shortages will arise.

Plants need nutrients just like humans, and they need different amounts of nutrition during their different life cycles. During the growth phase, this means that plants need a different ratio of nutrients compared to the bloom phase. The results of using separate grow and bloom nutrients are visibly better compared to using a single feed. Note: You don’t feed a baby the same way as you would feed an adult, do you?

Multi Total Organic (Enzyme Optimizer & Soil Improver)
Take Root Organic (Root Stimulator)
A+B Grow (Soil or Hydro/Coco Base Feed)

Multi Total Organic (Enzyme Optimizer & Soil Improver)
Take Root Organic (Root Stimulator – (in veg and only in the first two weeks of the flowering phase)
A+B Bloom (Soil or Hydro/Coco Base Feed)
Explode (Bud Booster)

Grow Phase: Laying the Foundation

During the Grow Phase, a plant is at its most vulnerable. Fungi and bacteria related diseases are a threat to the underdeveloped roots and leaves. The right mix of the 17 essential elements is needed to help a plant develop during the Grow phase and support a maximum growth rate. The proper mix will make and keep the plant vital and strong throughout this phase.

A+B Grow Hydro/Coco RO/Soft Water is a precisely mixed 2 part system that stimulates maximum growth and prepares your plants to reach their maximum yield.

*A+B Grow Hydro/Coco RO/Soft Water is optimized to reach PPM 900-1,000 or EC levels: 1.8-2.0 (it is possible to deviate) to get an even better result!

Bloom Phase: Time to Shine

During the Bloom Phase, a plant is getting ready to pollinate. The photoreceptor proteins within the plant indicate when to bloom. At that moment, the plant starts creating blossoms, or flowers, so that pollen can fertilize the female plant. This process costs the plants energy. The right balance of the 17 essential elements is needed to stimulate the plants’ bud formations during the Bloom phase. Phosphorus is a key element that is needed for maximum yields. The proper ratio of nutrients will enhance the Bloom phase to create bigger buds and boost yield.

A+B Bloom Hydro/Coco RO/Soft Water is a perfectly mixed 2 part system that stimulates maximum blooms and prepares your plants to reach their maximum yield.

*A+B Bloom Hydro/Coco RO/Soft Water is optimized to achieve PPM 1,100-1,200 or EC levels: 2.2-2.4 (it is possible to deviate) to get an even better result!